CPU cooler Vinga CL3003

Vinga CL3003 is a cooler for INTEL and AMD processors, compatible with 10 different sockets. The model is equipped with an aluminum heatsink. The working length of the blades is 12 cm. At the same time, their rotation speed does not exceed 1800 revolutions per 60 seconds. Thanks to this ratio between the cooler diameter and its rotation intensity, the device operates quite quietly: the noise level does not exceed 26.5 dB.

The fan connects to the motherboard using 4-pin technology. The four-pin connector has an important advantage: thanks to the fourth wire, it can receive control signals that regulate the speed of the impeller.

The movement of the blades is ensured by a hydrodynamic bearing. In it, the shaft is immersed in a working fluid, which is held by pressure differences. Thus, the cooler produces minimal noise during operation, and the bearing itself wears out significantly slower.

The model is equipped with 2 copper heat pipes that provide additional heat absorption. Inside the tubes, there is a special liquid compound that quickly evaporates at the hot end, thereby reducing the air temperature, and then condenses at the cold end of the system, after which the cycle repeats an unlimited number of times until the service life of the parts comes to an end.